You are watching: 1998 chevy silverado power steering pump diagram
I have a significant fluid leak ~ above the optimal power steering hose yet cannot find where the ends of the hose room located. Is there a schematic obtainable that might help me? Or walk anybody have any tips on this replacement? many thanks in advance.
I have a significant fluid leak top top the height power steering hose yet cannot discover where the end of the hose space located. Is over there a schematic available that might assist me? Or does anybody have any kind of tips on this replacement? many thanks in advance.
On the truck they space pretty straight forward. You might or might not need to pull the pump off to gain the hose turn off the ago of it. To perform that would need renting a pulley puller. After you replace them jack increase the van so the prior tires space off the ground, fill the device with fluid and also turn the wheel lock to lock 30 times. This pushes fluid thru the system before you begin it, it stops foaming of the fluid and will avoid pump damage. I learned that an approach from the instructions consisted of with my brand-new ac delco ps pump. Indigenous the diagram the looks prefer you just have actually a press line native the earlier of the pump to the equipment box (#13 below) and a return line from the gearbox come the pump (non pressure #14 below).
On that truck they are pretty directly forward. You may or might not have to pull the pump off to get the hose off the back of it. To execute that would call for renting a pulley-block puller. After ~ you change them jack increase the van so the former tires room off the ground, fill the mechanism with fluid and turn the wheel lock to lock 30 times. This pushes fluid thru the system before you begin it, it stops foaming of the fluid and also will prevent pump damage. Ns learned that method from the instructions included with my brand-new ac delco ps pump. Native the diagram that looks favor you just have a push line native the ago of the pump come the gear box (#13 below) and also a return heat from the gearbox to the pump (non pressure #14 below). View attachment 57633
Thanks, Pikey. Do you or does anybody else understand if I have to remove the pan shroud, fan etc just to change that height hose?
On mine 96\" Tahoe when I replaced the press line which ns think is what you mean by the top one i didn\"t have to remove anything to acquire at it, but the area is tight and also a pains to occupational in.
1996 Chevy Tahoe LT 5.7L V8 4X4 246,000+ miles. Developed proudly at Janesville Assembly in Janesville, WisconsinBasic mods: Lights all over, bunch of electric work, and a couple cooling mods.
See more: Reincarnated As A Dragon’S Egg ～Lets Aim To Be The Strongest
Thanks guys. I have just removed the top half of the shroud and will eliminate the bottom half and everything else is in the way.
Continue v Google
A forum community devoted to all basic Motors van owners and also enthusiasts. Come sign up with the discussion about performance, lift kits, wheels, tires, modifications, troubleshooting, maintenance, and more!
Chevy Silverado Forum (GMC Sierra)Member IntroductionsGeneral Chevy & GM tech QuestionsChevy Suburban Forum (GMC Yukon XL)GM Powertrain