L>Material Safety Data Sheet 2-Bromo-2-methylpropaneACC# 07594
Section 1 - Chemical Product and Company Identification

MSDS Name:
2-Bromo-2-methylpropaneCatalog Numbers: AC403080000, AC403081000, AC403085000Synonyms: tert-Butyl bromide.Company Identification:Acros Organics N.V.One Reagent LaneFair Lawn, NJ 07410For information in North America, call: 800-ACROS-01For emergencies in the US, call CHEMTREC: 800-424-9300

Section 2 - Composition, Information on Ingredients
CAS# Chemical Name Percent EINECS/ELINCS
507-19-72-Bromo-2-methylpropane 96+ 208-065-9
Section 3 - Hazards Identification
EMERGENCY OVERVIEWAppearance: yellow-brown liquid. Flash Point: 18 deg C. Danger!
Highly flammable.

You are watching: 2-bromo-2-methylpropane hazards

Flammable liquidand vapor. Causes eye, skin, and respiratorytract irritation.Target Organs: Respiratory system, eyes, skin.Potential Health Effects Eye: Causes eye irritation. Skin: Causes skin irritation. May be harmful if absorbed through the skin. Ingestion: May cause irritation of the digestive tract. May be harmful if swallowed. Inhalation: Causes respiratory tract irritation. May be harmful if inhaled. Chronic: No information found. There is limited evidence that 2-Bromo-2-Methylpropane causes cancer in animals. It may cause cancer of the
Section 4 - First Aid Measures
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Ingestion: Do not induce vomiting. Get medical aid. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Notes to Physician: Treat symptomatically and supportively.
Section 5 - Fire Fighting Measures
General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors may form an explosive mixture with air. Vapors can travel to a source of ignition and flash back. Will burn if involved in a fire. Containers may explode in the heat of a fire. Flammable liquid and vapor. Extinguishing Media: Use water spray to cool fire-exposed containers. Use foam, dry chemical, or carbon dioxide. Water may be ineffective.Flash Point:
18 deg C ( 64.40 deg F)Autoignition Temperature: Not available.Explosion Limits, Lower:Not available. Upper: Not available. NFPA Rating:(estimated) Health: 2; Flammability: 3; Instability: 0
Section 6 - Accidental Release Measures
General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Remove all sources of ignition. Use a spark-proof tool. Do not let this chemical enter the environment.
Section 7 - Handling and Storage
Handling: Use only in a well-ventilated area. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Storage: Keep away from sources of ignition. Store in a cool, dry place. Store in a tightly closed container. Flammables-area.
Section 8 - Exposure Controls, Personal Protection
Engineering Controls: Use explosion-proof ventilation equipment. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.Exposure Limits
Chemical Name ACGIH NIOSH OSHA - Final PELs
2-Bromo-2-methylpropanenone listednone listednone listed
OSHA Vacated PELs: 2-Bromo-2-methylpropane: No OSHA Vacated PELs are listed for this chemical. Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA"s eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators:
A respiratory protection program that meets OSHA"s 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - Physical and Chemical Properties
Physical State: LiquidAppearance: colorless - yellow-brownOdor: Not available.

See more: Tell It To The Rain

pH: Not available.Vapor Pressure: 57 hPa