Split the purchase amount of 500 EUR/AUD/USD or even more in as much as 3 interest-free monthly payments with Splitit.

You are watching: Ek-xres 100 spc-60 mx pwm


EK-XRES 100 SPC-60 MX PWM (incl. pump) is a value-oriented water cooling pump reservoir combo. It has been designed to lower the manufacturing costs yet still offer excellent hydraulic performance at the best price.

The core of the unit is EK-SCOMPUTER 60 water pump that offers just a 4-pin PWM FAN header for operation; no MOLEX connector is required! PWM control will permit you to set automatic pump rate regulation depending on your CPU temperature. Full performance on demand also or whisper quiet operation in idle mode! With the maximum pressure head at 2.2m (7.2 ft), maximum circulation at 250 L/h and a really compact form, we recommend this pump reservoir combo for smaller sized builds, particularly if you are assembling your practice loop in a mini ITX situation.

EK-XRES 100 SPC-60 MX PWMseries reservoir comes preinstalled with anti-cyclone insert. In addition, a PU anti-vortex foam is enclosed.

The primary body attributes two G1/4 threaded ports of which one is an inlet (in the reservoir) and also one is an outlet (from the pump). EKrecommends the use of EK-ACF series compression fittings.

Reservoir tube is made of aquality acrylic product, while the rest of the pump/reservoir body is made from injection molded high quality ABS product.

This reservoir deserve to be quickly upgraded withmuch longer acrylic tubessupplied by EK-RESX3 series reservoirs.

The height of this combo unit have the right to beprovided as an inlet by including theEK-RES X3 - Multiport TOPand anEK-RES X3 - Internal Tubewith the matching length to your reservoir size. The Internal Tube is necessary to prevent the splashing sound of the coolant inside the reservoir and to proccasion coolant foaming. It is recommfinished that the end of the inner inlet tube is subunified in coolant.

*

EK-Cable Pump trial and error adapteris recommended to be supplied for trial and error objectives while leak-testing your loop and is intended to be linked directly to PSU, without the require for powering up the whole device.

EK-XRES 100 SPC-60 MX PWM can also be upgraded through either:

*

Pump electrical and mechanical properties:- Motor: Electronically commuted motor - Rated voltage: 12V DC- Power consumption: 6W - Maximum press head: 2.2m - Maximum flow: 250 L/h - Maximum mechanism temperature: 50°C - Materials: PPS-GF30, EPDM O-rings, Aluminium oxide, graphite - Power connector: 4-Pin PWM FAN connector

Technical specifications:- Reservoir diameter: 60mm- Reservoir cost-free volume: ~ 125mL- Unit measurements: 68x67x117mm - Mounting hole pattern: 50x50mm

Operational regime:- PWM duty cycle: ~ 20-100%- Default behavior: Runs at 100% duty cycle once no PWM feedback signal is presentEnclosed:- Pump reservoir combo unit- Mounting material- Allen key- Anti-vortex polyether black foam- Installation manual

Made in Slovenia!Pump made in China!


The SPC pump is water lubricated, in various other words, it offers a wet rotor design. Because of this, it is strongly recommfinished not to run the pump dry.

See more: Vacmaster 12 Gallon, 5 Peak Hp, Wet/Dry Vacuum With Detachable Blower, Vbv1210

This product is NOT compatible via DDC Heatsink Housing!The EK-UNI Pump Bracket bracket is simply for showsituation and also it is not consisted of with the unit.