The LG washing machine’s CL code is not a mistake. It’s an “information code” that informs the user that the control panel’s “child lock” has been enabled. Let’s find out what the LG washer Cl error code is and how to fix it in this article!
In LG washing machines, what does CL code mean?
The CL error on an LG washing machine does not indicate a malfunction. This code notifies the owner that the “child lock” mode has been activated. As a result, the system disables the buttons on the panel, preventing them from being pressed while the machine is being washed.
Small toddlers have the ability to change the channel, turn off the washing machine, and even ruin the LG equipment. The versatile appliance can do a number of tasks. As a result, its panel is very sensitive and prone to damage. The manufacturer offers a security code for this.
The reasons for the appearance of the code
As previously stated, the CL (Child Lock) error does not indicate a problem.
But what if you loaded the washer with washing and turned it on, but the machine doesn’t make any noises and merely displays the CL code? If a user installs the lock once, it stores the settings for subsequent wash cycles. It happens even when the LG washing machine is unplugged from the power supply.
Until you disable the mode, the error will appear.
How to deal with troubleshooting
You must use the key combination on the control panel to eliminate the CL error. It varies depending on the LG washing machine model. Here’s an example of some of the most common commands. To utilize them, hold down two buttons simultaneously for three seconds:
- Pre-rinsing + Pre-washing
- Intensive washing + additional washing
- Option button + Temperature
Refer to the LG washing machine instructions for further details. This should assist in the removal of the CL mistake.
LG’s “protection” must behave differently depending on the brand of the washing machine. The button panel can be totally or partially blocked. In addition, the Enable / Disable button is still functioning. And it isn’t always practical. The problem is that if a youngster abruptly turns off the machine while it is being washed, the electrical controller may be damaged.
Breakage signs and symptoms
When the CL error appears on the LG washing machine’s display and you can’t switch it off, you should be concerned. The protective function must be turned on and off by pressing the buttons in normal operation. A malfunction happens if this does not occur.
What should you do if you see any fault signs?
- The washing mode cannot be changed. After turning it on, the gadget displays the CL error code. The error persists even after the plug is removed from the outlet.
- The machine is in normal operation. However, in the middle of the program, a problem code arises.
- You activated the lock mode. However, it later fails to switch off or does so intermittently.
What should you do in this situation? The multimeter control unit must be checked by disassembling the front panel. Then take the device out and use the tester to check a loop.
Check the contacts of the buttons as well, as they may have become oxidized over time. Inspect the control unit’s wiring, connectors, and joints as well. Replace the control board or call the service center if it fails.
See more at our Occupychristmas website!