Miele dishwashers have an A+++ energy rating, indicating that they are exceptionally energy efficient. AutoOpen drying features provide optimal drying, while MultiFlex trays provide maximum ease in fully integrated models.
Two other features that give these appliances all-around kitchen attractiveness are automatic dispensing with integrated PowerDisk and stylish handle designs.
Even if you can’t fix it yourself, knowing what’s wrong with your dishwasher can help you figure out what’s wrong. Take a look at some of the most common Miele Dishwasher Error Codes and solutions below!
Problems with Miele Dishwashers
Dishwasher Miele won’t drain
A clogged drain pump or filter, a kinked drainage line, or a broken impeller on the drain pump itself could be the cause of your dishwasher’s tub not emptying. A faulty motor, as well as a worn or torn drive belt, might cause drainage problems.
Food leftovers may have become trapped in the drainage line if your dishwasher is linked to the waste disposal. In this case, the best way to solve a Miele dishwasher problem is to run the waste disposal while also running the water in the kitchen sink to clear any clogs.
Dishwasher Miele won’t fill
When there is a problem with the water supply, the water inlet valve may be to blame. It’s possible that this isn’t switched on at all, or that it’s not operating at all. The valve must be replaced if it is leaking or damaged. A kinked hose could also be the blame!
Insufficient water pressure can also make it difficult for the dishwasher to fill. In many cases, the pressure will return to normal on its own, but if it does not, you may need to seek assistance from your water source.
Dishwasher Miele Won’t Start
The circuit breaker trips every time you turn on the appliance, which is usually an electrical malfunction. It’ll be necessary to inspect the power source, power socket, fuses, and electrical wiring. It’s best to leave this to a skilled engineer, who will do safety inspections and fix or replace any problematic components. 
Knocking Noises from Miele Dishwasher
This means the spray arm is obstructed and can’t move freely. Dishes are simply not washed when the water is not sprayed. Often, a piece of dinnerware is obstructing correct motion, and the spray arm thumps against it as it turns. The spray arm will need to be replaced if it is damaged. The water from the tub is forced into the spray arm by the circulation pump. If this part fails, the water will not flow as it should. This is a more complicated repair that should be handled by a professional.
Other difficulties could include the rattling of dishes bumping against each other, which, if not regulated, can harm the dinnerware.
Meanings of Error Codes
When a specific defect is found in a Miele dishwasher, fault codes are shown. These codes may be substituted with Miele dishwasher symbols depending on your model. Check out the following list of dishwasher fault codes, light indicator codes, and symbol codes.
Error Codes for Miele Dishwashers include
- F11 – water won’t drain, indicating a drainage problem.
- F12 or F13 – a closed stopcock that prevents water intake.
- F14 or F69 – A clogged circulation pump has been discovered.
- F32 – This notice will appear if there is a problem with the door closing.
- F52 – The sensor has detected too many foam suds in the cabinet, and the program will be terminated.
- F70 – the waterproofing system is now operational.
- F78 – this code appears because of a problem with the circulatory pump.
Codes for Light Indicators
Faults in Miele dishwashers may also be indicated by flashing lights. The water intake indicator flashing immediately after the program has started is one of them. When the spray arm indicator flashes, it means there is a blockage. In your manufacturer’s guide, you’ll find a comprehensive list of light indication codes.
Read More:
Symbol Codes (symbols)
A completely blank display indicates a software problem. Or that the machine’s standby mode is turned on. Other symbols to consider are:
- There are three horizontal bars – There could be a technical problem.
- Instructions are written in a foreign language – As a result of an erroneous language setting
- There is no timer – Some models only show start times with a delay.
- Close the lid on the salt container – The cap isn’t securely fastened.
Faults and Repairs
F11 – Any blockages in the drain pump must be removed before cleaning the filter combination. The drain hose must be straightened if it is kinked. The drain hose system and drain should both be cleaned thoroughly.
F12 or F13 – Check for obstructions and kinks in the water inlet filter and inlet hose. The stopcock should be switched on to turn on the water supply. Also, the water pressure should be checked. This may necessitate the services of a plumber.
F14 or F69 – The filter assembly must be removed, and the interior must be immersed in a mixture of warm water and rinse aid for five minutes. Begin the program. Rep the process three times more. Restart the dishwasher after turning it off. Using the picker button, choose the software you desire. Press the Start/Stop button.
F32 – It’s possible that you closed the door too quickly. For one minute, disconnect the dishwasher from the power source.
F52 – Stop/Finish should be selected on the selector switch. To stop the LED flashing, lightly press the Start/Stop button for a second. Shut down the dishwasher and then turn it back on. When using the Quick Wash program, avoid using detergent tablets.
F70 – You’ll need to shut off the water supply and contact your appliance repair service.
F78 – The circulation pump is the source of the Miele dishwasher problem F78. You might try shutting off the dishwasher for 30 seconds and then turning it back on to clear the error code. Select the desired wash program and push the start button.
If this option fails, you’ll need to schedule a Miele dishwasher repair with a professional. All dishwasher repairs are performed by highly trained local professionals with years of expertise in the business.
Take Care of Your Dishwasher
Miele dishwasher maintenance is necessary to keep your machine in good working order. You must do the following on a regular basis:
- Drains should be cleaned.
- Examine the racks.
- To get rid of soap scum and odors, run vinegar through a cycle.
- The filter should be cleaned.
Do you require a fully qualified engineer?
When your Miele dishwasher requires immediate attention, you’ll be able to schedule an appointment with a reputable appliance repair company the same day. Every repair is backed by a six-month warranty. Only well-trained and experienced professionals will be dispatched to your location. Any flaws will be identified as soon as possible. And it was quickly fixed. Your dishwasher will be operational again in no time.
See more at our Occupychristmas website!
