Are your garments still dripping wet at the conclusion of the cycle in your washing machine? When your Washer not draining correctly, there are a few things you may do.
Your machine isn’t draining properly if you reach into your washer expecting to transfer damp clothing to the dryer but instead find that your clothes are sopping wet and water is still standing at the bottom of the tub. Yes, you can call your plumber right away, but before you do, why not try to solve the problem yourself? You might be able to locate and resolve the problem before seeking assistance, saving yourself the cost of a service call. When your washer won’t drain, here are some questions to ask.
[Before doing any of these actions, make sure the machine is turned off by disconnecting it from the wall or flicking the circuit breaker on the electrical panel.] Additionally, dump out any standing water in your machine’s tub.
Is it the Drain Hose that’s causing the problem?
It’s possible that the hose that transports water from the back of the machine is preventing it from draining properly. The water flow through the washing machine hose could be obstructed by a kink, or the unit could be pressed too close to the wall, impeding water flow through the hose. It’s also possible that the hose has become clogged. Disconnect the drain hose (have a bucket or other big container ready to capture any water) and look inside with a flashlight for any obstructions. If you can’t reach what’s obstructing the tube, take it outside and put water through it with a garden hose. After that, reconnect the drain hose to the machine, turn on the power, and start the rinse cycle to test if the water is draining properly.
Is it the Lid Switch that’s causing the problem?
If the lid switch is broken, the machine may be unable to drain properly. The lid switch is usually a simple plastic switch situated beneath the washer’s lid or door. Open the washer and press the switch to see if it’s working properly. The switch may need to be replaced if you don’t hear a clicking sound.
Is it a Belt, or is it something else?
Check your machine’s manufacturer’s diagram to identify where the belts are situated. Examine it for a break, damage, or whether it has shifted out of place.
Is it the Pump, or something else?
Locate the pump using the manufacturer’s diagram for your washer model. It’s normally located at the machine’s front or back. Prepare a screwdriver in case you need to remove a panel to get to it. Remove the screen by detaching the pump and opening it. Thoroughly rinse the screen. Make that the fan blades or arms are operating freely and that none of them are broken or missing by turning them. Look inside the pump’s exit to see if anything has been lodged. Check for cracks or leaks in the pump. You may need a new one if the blades are broken or the pump is leaking.
Is it a clog in the drain?
You may have a clogged drain if there is still water in the tub or on the floor. To test if you can clear the clog, run a plumber’s snake through the drain opening. Checking the pockets of all clothing articles before washing them is one of the simplest preventive measures you can take to keep your washer draining properly. Coins and other small objects can become caught in the washer’s pump or other components, causing draining issues. Pay attention to any unexpected noises coming from your washer; there could be a forgotten item bouncing around in the tub, causing drain issues.
Read More:
Even after troubleshooting, why isn’t my washing machine drain?
Additionally, always follow the manufacturer’s instructions and suggestions for the type of laundry detergent to use and how to correctly load the machine, depending on your model. If the answers to these questions don’t disclose why your washer isn’t draining properly, you might have to call a plumber.
Conclusion
While it is feasible to replace the washer pump, lid switch, or belts on your own, you may prefer to hire a professional to do it instead. If the drain is clogged and you are unable to clean it yourself, you may need to contact a plumber for assistance. Keep in mind that the average life expectancy of a washing machine is around 14 years. This time frame takes into account 7 loads every week. You may be able to get away with a dependable machine for a longer period of time depending on the make and model, but if your washer is approaching the 14-year mark and you’ve had difficulties with it in the past, it’s time to update. See more at our Occupychristmas website!