Summer is rapidly arriving, despite how far away it may appear. That’s why, if your Whirlpool refrigerator not making ice, you’ll need to conduct some quick troubleshooting before the warmer weather arrives. Here’s how to keep ice on hand, from making sure the ice machine is turned on to checking for water supply difficulties.
When the ice machine in a French door refrigerator stops working, there is sometimes an easy DIY remedy. These top 5 causes will help you figure out how to tackle the problem or when to seek professional help.
The ice maker on my Whirlpool isn’t working
Make sure the ice maker is turned on before troubleshooting a Whirlpool French door refrigerator that isn’t making ice. When your Whirlpool ice maker stops operating but the water dispenser continues to work, this is frequently the cause. Find the ice maker’s power switch and make sure it’s turned on.
However, some later versions do not include a power switch on the ice maker itself. Instead, computerized controllers handle the power supply in modern freezers. Refer to the use and care handbook for your model if you can’t find a power switch. It will show you how to use the electronic controls to turn on or off the ice maker.
Whirlpool Freezer Temperature Is Incorrect
It’s possible that the temperature settings on your Whirlpool refrigerator are inaccurate. The freezer should be set between 0 and 5 degrees Fahrenheit for proper ice formation. Ice may not adequately freeze if the temperature is too high, and it may appear smaller or deformed. Temperatures below 0°F, on the other hand, may cause a buildup of ice and frost, preventing ice from ejecting.
The ice maker on my Whirlpool is stuck
A typical cause of a Whirlpool French door refrigerator not creating ice is ice blockages. When ice comes out of the ice maker, it is frequently not totally frozen. When slushy water collects on the ejector’s arm over time, the ice maker might become jammed, preventing new ice from dropping.
If a jam is preventing your Whirlpool ice maker from dumping ice, it must be cleaned before ice production can resume. Chip away at the ice with a plastic utensil to clear it from the ejector’s arm. Metal utensils might cause the ice maker to break down.
Problems with Water Supply
In some cases, your Whirlpool ice maker may be unable to produce ice owing to a lack of water supply. Water flow to an ice maker can be restricted by a clogged water filter, kinked water line hose, or faulty water inlet valve. Ice production will be reduced or halted as a result of this. Here’s how to deal with water shortages that could impede ice production:
- Replace the water filter in your refrigerator. To avoid clogs, this should be done every 6 months.
- Check for kinks in the waterline of the refrigerator. Straighten any kinks and avoid others by ensuring sure the refrigerator isn’t pressed against the wall too tightly.
- Replace a faulty water input valve with a professional repair.
Ice Maker in Refrigerator Isn’t Working
It’s conceivable that one or more ice maker components are defective if troubleshooting your Whirlpool French door refrigerator not creating ice offers no results. Because numerous pieces aren’t supplied individually, even if one element fails, you may have to replace the entire ice machine system. For this job, we advise using a professional service.
See more at our Occupychristmas website!